How are the home automation modules connected?

Home automation modules are connected to the monitor by the 485 interface, but with the help of BAS-IP SH-61 protocol adapter. You can download the connection scheme on our site.

How should the home automatics modules be programmed?

The home automatics modules are programmed with the help of free software in the delivery set.

How should the home automation modules be connected for the programming?

The terminal module of the home automation control should be connected to the computer by the USB-RS485 converter. After that, the operating mode should be programmed by the help of the free Software.

How should the IP-cameras be connected?

Cameras should be directly connected in the same local network as an intercom. By the help of WEB browser on the PC one should visit IP address of the internal monitor in the setup panel of the IP-cameras and register the IP-camera address which video stream should be imaged.

How many rooms can be supported by the help of Smart house function?

Due to the interface that is put in the internal monitor, Smart houses can support up to 16 rooms.

At what resolution are photos stored in the video monitors BAS-IP?

Photos are recorded in the internal monitor in 640×480 resolution.

How do we set up 2 intercoms AR-07 and outdoor panel to make ringtone to go to both intercoms simultaneously, and can BAS-IP equipment be configured in such a way?

Yes, it can. BAS-IP equipment can be configured so ringtone goes to both intercoms simultaneously. In the intercom settings in Address tab, in Main field you should select “0” for the one intercom and “1” – for the other. The rest points of tab address (house number, entrance number, floor number, apartment number) should match.

Also, both intercoms Sync field should have the same default value “123456” or any same number (this password between intercoms is required to avoid an unauthorized connection of foreign monitors). After work is done, you can receive a call on 2 internal monitors at once.

Please explain, what are IR modules?

IR (infrared) modules are modules that send IR signals to all devices which have IR receivers, such as TV, air conditioning, DVD and some music player. In BAS-IP equipment such IR module is called SH-67. This module receives remote control signals and all required commands are recorded on it, and then the PC sets up their order. Configured SH-67 this way, you can manage devices with IR receivers with IR module which will send a signal to a receiving device instead of remote control.

While sending commands in IR range, module can send up to 8 commands at the same time. Module can manage household appliances which have IR receivers using scripts. For this module work, you need SH-61 protocol converter which is connected directly to BAS-IP internal monitor. This protocol converter works as a gateway and convert internal monitor commands to the suitable commands for home automation modules.

Is it possible to set up BAS-IP interphone system in a way to make a call from one outdoor panel come to several monitors?

Is it possible to set up BAS-IP interphone system in a way to make a call from one outdoor panel come to several monitors?

Please tell, is it possible to install a network reader with an embedded controller CR-01 outside?

Reader with an embedded controller CR-01 has a wide operating temperature range from -40 up to +65 C and dust and moisture proof degree IP65 so that it can be installed outside.